Skip to main content
Legacy guide. Parts list for the original DevKit 1 build. Community-maintained and unsupported. See the build guide.

Required components

Microcontroller

Seeed Studio XIAO nRF52840 Sense

Power

Rechargeable LiPo battery

Switch

Slider switch for power control

Case

3D printed enclosure

Parts list

Seeed Studio XIAO nRF52840 Sense board

The brain of your Omi device: a compact Bluetooth LE board with a built-in microphone.
Compare vendors before ordering. Prices and availability change.

Rechargeable battery

A small LiPo battery to power your device. Search any electronics supplier for a 1S LiPo in the size your case fits.

Slider switch

Power switch to turn your device on/off. Model: SS12D00-G3, 3mm
You only need one switch per device. The packs include many extras.

Wires

Thin wires for connecting components. Any electronics supplier will do.

3D printed case

The enclosure for your Omi device.

Download STL files

Get the 3D print files from GitHub
Options for getting your case printed:
  • Local makerspaces - Check Makerspace.com for locations near you
  • Online services - Use services like Shapeways, Craftcloud, or PCBWay
  • Local libraries - Many public libraries now have 3D printers available
  • University labs - Students may have access to campus maker labs
  • Material: PLA or PETG recommended
  • Layer height: 0.2mm for good detail
  • Infill: 20% is sufficient
  • Supports: May be needed depending on orientation

Important notes

The provided links are to third-party vendors. We do not guarantee product availability or quality.
  • Some components may have long shipping times from certain vendors
  • Consider buying extras of small components like switches

Next steps

Build guide

Step-by-step assembly instructions

Flash firmware

Install firmware on your device

App setup

Set up the Omi app